Miter saws are available in a wide range of varieties. They range from corded to cordless. Also, they have varying blade sizes. The good thing about cordless miter saws is that they are easier to use because of portability. It is advisable to find one that best suits your needs. The following are some of the things to look for when buying a cordless miter saw.
Blade Sizes
The blade size is a vital thing to look for when selecting a miter saw. They are available in various sizes that range from 12 inches, 10 inches, and 8 inches. Ideally, the blade size to choose should depend on the nature of the work you are doing. Most saws have a 10-inch blade. The small radius makes it possible for the blade to run faster whilst consuming less amount of energy. If you want to make long cuts, then you should get a 12-inch blade. The large blade size is ideal for doing different tasks that include deck building.
Sliding or Compound Miter Saw
As far as creating things that need angled cuts, such as crown molding or picture frames, the recommended option is a compound miter saw. That is because it can pivot right and left and create a compound that is cut with a single swift pass. On the other hand, a sliding miter saw lets you pull a blade along the line of cut. In this way, it increases the cut capacity to make it ideal for cutting different pieces of wood planks.
Maximum Angles
The maximum angles determine the wood pieces that can be cut. If it has a higher number, it means it is versatile. Also, values for a saw’s miter depend on how far your saw can turn. The saw’s miter angle is dependent on how far the saw tilts. A compound miter saw will only tilt in one direction, but it can make cuts are required by turning boards over and cutting them backward.
Accuracy Features
That is because the stops make it possible to make precise cuts at various degrees. Place the saw to make precise cuts and even reproduce cuts. Also, you should look for a laser guide. Some saws have LED lighting, which illuminates the cutting area. That allows you to align the blade with cut marks. In this way, you can save a lot of time. It will also show you if the wood piece has shifted.…